Elevator Cabin - FACE to FACE

The interior side of our Face To Face model elevator cabin is designed with specialty facing.

Bronze stainless sheet was used as an accessory in our  FACE to FACE model elevator cabin.

On the rear wall 6 mm full height bisote mirror is used in our FACE to FACE model elevator cabin.

In our FACE to FACE model elevator cabin 20 mm special natural granite is used for flooring. According to our clients requests standard granite stone coating or PVC floor are also applicable.

In our FACE to FACE  model elevator cabin internal electrical installations and lighting are ready to use in the elevator ceiling. Our elevator cabin ceiling is designed as a hinged system easily opening from inside. In this way, the lighting in the ceiling of the elevator cabin can be easily modified without departing from the cabin. Elevator ceiling consist of laser-cut patterned bronze stainless mirror.

Our elevator cabin interior handle consist of two pieces of stainless handrail. Thanks to the handrail fixation application, slackening problem of handrail can easily be solved by tighten the bolts from inside the elevator cabin. At the same time if needed it is possible to change the handrail from inside of the elevator cabin.

The ventilation holes consist on the cabin walls for the elevator cabin interior ventilation system. Withal there is a 220 V 12x12 square fan ventilation system in the cabin ceiling.  More powerful 220 V 15/60 special square fan ventilation system is optional.

External plug-in system cabin walls provide easy installation opportunity during the installations. Standard bolted railing, skirt sheet, tube magnetic sheet, flexible chock connection sheet and railing foot bump sheet is delivered with our FACE to FACE model elevator cabin.

FACE to FACE model elevator cabin may be used in residential buildings, villa and commercial buildings.